| １． |
Outline |
|
Students will learn the following contents:
(1) Structure and function of fuel device.
(2) Fuel injection control of electronic control unit and
(3) Structure and function of gasoline engine and hybrid.
Although this lesson is mainly lecture form, exercises are carried out in pairs, students need to present their answers and discussion will be held.
In this course, you will acquire knowledge, techniques and attitudes on the degree awards policy DP2.
|
| ２． |
Objectives |
|
Students can acquire the basic knowledge of the electronic control system by understanding the functions and structures of the parts, related to the electronic control system of the automobile engine. Students are then required to explain the contents of the engine control system required by the automobile engineer.
|
| ３． |
Grading Policy |
|
The evaluation is done by using the results of the 15th test (80%) and quiz (20%).
The answers will be explained after the test and quiz. An example of the answer shown in LMS.
|
| ４． |
Textbook and Reference |
|
textbook:
"Third grade automobile gasoline engine" Japan Automobile Development Promotion Federation Association (supervised by Ministry of Land, Infrastructure and Transportation Automobile Transportation Administration)
"Second grade gasoline car engine version" Japan Automobile Development Promotion Federation Federation (supervised by the Ministry of Land, Infrastructure, Transport and Tourism)
"Third grade automobile diesel engine" Japan Automobile Development Promotion Federation Association (supervised by Ministry of Land, Infrastructure and Transportation Automobile Transportation Administration)
"Second grade diesel automobile engine version" Japan Automobile Development Promotion Federation Federation (supervised by the Ministry of Land, Infrastructure, Transport and Tourism)
All ISBN codes not stated
Reference book: Automotive Technology Handbook (Public Utility Corporation Association Automotive Engineering Association Issued) ISBN 978-4-904056-59-2
|
| ５． |
Requirements (Assignments) |
|
Read the class content posted on the LMS as preparation. Read through the applicable range of the textbook and reference book, and understand the contents. In addition, since some homework such as assignment will be shown almost every time, please complete them. Approximately 1 hour for preparation, 2 hours for assignment and review.
|
| ６． |
Note |
|
Students are required to attend all lessons. Students are not allow to be late, leave early and absent will be taken seriously.
Automobile Vehicle Structure 1 is a ◆ mark of compulsory subject of the Automobile Technology Course [AT course].
We will conduct a small test at the 6th meeting and confirm the comprehension level in the middle. In addition to using LMS as an independent learning support, we will implement the Mobile-MARS test and questionnaire function as an interactive class as appropriate.
|
| ７． |
Schedule |
|
１. Fuel and lubricant
Preliminary examination: Third level textbook P135 ~ 140 to read through and understand about fuel for automobiles
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
２. Outline and structure / function of fuel device (injector, fuel pump, pressure regulator etc.)
Preliminary study: Read through the textbooks P 51 to 53 and understand the outline of the fuel injection device of the automobile
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
３. Structure and function of fuel device (fuel tank, fuel filter, etc.)
Preliminary examination: Third level textbooks P69-73 should be read through and understanding of the fuel supplier of the car
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
４. Structure and function of fuel device (LPG etc.)
Preliminary study: 2 Read through the textbooks P 53 - 56 and understand the LPG fuel and its fuel supply device
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
５. OBD regulation outline, J-OBD II function
Preparation: 2 Read through the textbooks P 105 - 106 and understand the external diagnostic equipment
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
６. Structure and function air quantity detection device of electronic control device (vacuum sensor, air flow meter, etc.)
Preliminary study: 2 Read through the textbooks P106-108 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
７. Structural and functional structure of electronic control unit Air quantity detection device (throttle position sensor etc) and small test
Preliminary study: 2 Read through the textbooks P108-109 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
８. Structure and function of electronic control unit Frequency signal sensor etc.
Preparation: 2 Read through the textbooks P109 - 113 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
９. Structure / function of electronic control unit Linear signal sensor, ON / OFF signal sensor etc.
Preliminary study: 2 Read through the textbooks P113 to 117 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
10. Structure and function of electronic control device Actuator drive circuit
Preliminary study: 2 Read through the textbooks P117 to 119 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
11. Structure and function of electronic control unit Control by ECU (startup control, post-start control, etc.)
Preliminary study: 2 Read through the textbooks P119-120 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
12. Structure and function of electronic control unit Control by ECU (air-fuel ratio learning control, various correction etc.)
Preliminary study: 2 Read through the textbooks P121 to 128 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
13. Structure and function of ignition control unit Control by ECU (Ignition timing control, energization time control, etc.)
Preliminary study: 2 Read through the textbooks P129 ~ 135 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
14. Presentation on the subject and general discussion
Preliminary study: Learn about tasks given in advance and prepare presentation materials or reports
Review: Consideration of issues again based on contents announced on the lecture day
|
15. Test, summary
|
|
| １． |
Outline |
|
Students will learn the following contents:
(1) Structure and function of fuel device.
(2) Fuel injection control of electronic control unit and
(3) Structure and function of gasoline engine and hybrid.
Although this lesson is mainly lecture form, exercises are carried out in pairs, students need to present their answers and discussion will be held.
In this course, you will acquire knowledge, techniques and attitudes on the degree awards policy DP2.
|
| ２． |
Objectives |
|
Students can acquire the basic knowledge of the electronic control system by understanding the functions and structures of the parts, related to the electronic control system of the automobile engine. Students are then required to explain the contents of the engine control system required by the automobile engineer.
|
| ３． |
Grading Policy |
|
The evaluation is done by using the results of the 15th test (80%) and quiz (20%).
The answers will be explained after the test and quiz. An example of the answer shown in LMS.
|
| ４． |
Textbook and Reference |
|
textbook:
"Third grade automobile gasoline engine" Japan Automobile Development Promotion Federation Association (supervised by Ministry of Land, Infrastructure and Transportation Automobile Transportation Administration)
"Second grade gasoline car engine version" Japan Automobile Development Promotion Federation Federation (supervised by the Ministry of Land, Infrastructure, Transport and Tourism)
"Third grade automobile diesel engine" Japan Automobile Development Promotion Federation Association (supervised by Ministry of Land, Infrastructure and Transportation Automobile Transportation Administration)
"Second grade diesel automobile engine version" Japan Automobile Development Promotion Federation Federation (supervised by the Ministry of Land, Infrastructure, Transport and Tourism)
All ISBN codes not stated
Reference book: Automotive Technology Handbook (Public Utility Corporation Association Automotive Engineering Association Issued) ISBN 978-4-904056-59-2
|
| ５． |
Requirements (Assignments) |
|
Read the class content posted on the LMS as preparation. Read through the applicable range of the textbook and reference book, and understand the contents. In addition, since some homework such as assignment will be shown almost every time, please complete them. Approximately 1 hour for preparation, 2 hours for assignment and review.
|
| ６． |
Note |
|
Students are required to attend all lessons. Students are not allow to be late, leave early and absent will be taken seriously.
Automobile Vehicle Structure 1 is a ◆ mark of compulsory subject of the Automobile Technology Course [AT course].
We will conduct a small test at the 6th meeting and confirm the comprehension level in the middle. In addition to using LMS as an independent learning support, we will implement the Mobile-MARS test and questionnaire function as an interactive class as appropriate.
|
| ７． |
Schedule |
|
１. Fuel and lubricant
Preliminary examination: Third level textbook P135 ~ 140 to read through and understand about fuel for automobiles
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
２. Outline and structure / function of fuel device (injector, fuel pump, pressure regulator etc.)
Preliminary study: Read through the textbooks P 51 to 53 and understand the outline of the fuel injection device of the automobile
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
３. Structure and function of fuel device (fuel tank, fuel filter, etc.)
Preliminary examination: Third level textbooks P69-73 should be read through and understanding of the fuel supplier of the car
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
４. Structure and function of fuel device (LPG etc.)
Preliminary study: 2 Read through the textbooks P 53 - 56 and understand the LPG fuel and its fuel supply device
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
５. OBD regulation outline, J-OBD II function
Preparation: 2 Read through the textbooks P 105 - 106 and understand the external diagnostic equipment
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
６. Structure and function air quantity detection device of electronic control device (vacuum sensor, air flow meter, etc.)
Preliminary study: 2 Read through the textbooks P106-108 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
７. Structural and functional structure of electronic control unit Air quantity detection device (throttle position sensor etc) and small test
Preliminary study: 2 Read through the textbooks P108-109 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
８. Structure and function of electronic control unit Frequency signal sensor etc.
Preparation: 2 Read through the textbooks P109 - 113 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
９. Structure / function of electronic control unit Linear signal sensor, ON / OFF signal sensor etc.
Preliminary study: 2 Read through the textbooks P113 to 117 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
10. Structure and function of electronic control device Actuator drive circuit
Preliminary study: 2 Read through the textbooks P117 to 119 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
11. Structure and function of electronic control unit Control by ECU (startup control, post-start control, etc.)
Preliminary study: 2 Read through the textbooks P119-120 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
12. Structure and function of electronic control unit Control by ECU (air-fuel ratio learning control, various correction etc.)
Preliminary study: 2 Read through the textbooks P121 to 128 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
13. Structure and function of ignition control unit Control by ECU (Ignition timing control, energization time control, etc.)
Preliminary study: 2 Read through the textbooks P129 ~ 135 and understand the electronic control unit of the engine
Review: to understand the contents of the lecture range again based on the LMS teaching materials
|
14. Presentation on the subject and general discussion
Preliminary study: Learn about tasks given in advance and prepare presentation materials or reports
Review: Consideration of issues again based on contents announced on the lecture day
|
15. Test, summary
|
|
|