| １． |
Outline |
|
The basic operations of 3D-CAD (Computer Aided Designing) with CATIA V5 and the imaging of a solid shape from the drawing are taught.
|
| ２． |
Objectives |
|
The basic operations of 3D-CAD required for mechanical engineers are studied. And the example of problems in 3D-modeling based on the models in the real machinery industry are solved for the improvement of efficiency at the machine element design stage.
|
| ３． |
Grading Policy |
|
Final grade will be calculated according to drawing assignments (100%). To pass, students must earn at least 60 points out of 100.
|
| ４． |
Textbook and Reference |
|
They will be introduced in the class.
|
| ５． |
Requirements (Assignments) |
|
Will be introduced in the class.
|
| ６． |
Note |
|
This course will be taught in Japanese.
|
| ７． |
Schedule |
|
| １. Guidance, Purpose and ability of the 3D Computer Aided Designing |
| ２. Basic operations (mouse operation, GUI interface, workbench, etc) |
| ３. Fundamentals of the operation #1 : Sketch and basic 3D modeling |
| ４. Fundamentals of the operation #2 : Fundamental features (mouse operations, choose the "Material", etc.), Basic exercise: V block |
| ５. Sketch 1 : Basic exercises |
| ６. Sketch 2 : Practical exercises |
| ７. Part design 1: Protrusion, Remove, Axial rotation, Axial slotting, Holing, etc. |
| ８. Part design 2: Chamfar, Fillet, Dlaft, Patterning, Mirrering, Schaling, etc. |
| ９. Wireflame modeling |
| 10. Surface modeling |
| 11. Assembly 1: Basic exercises |
| 12. Assembly 2: Practical exercises |
| 13. Drafting, and check assignments |
| 14. Design project #1: group discussion and designing |
| 15. Design project #2: modeling and check, presentation |
|
| １． |
Outline |
|
The basic operations of 3D-CAD (Computer Aided Designing) with CATIA V5 and the imaging of a solid shape from the drawing are taught.
|
| ２． |
Objectives |
|
The basic operations of 3D-CAD required for mechanical engineers are studied. And the example of problems in 3D-modeling based on the models in the real machinery industry are solved for the improvement of efficiency at the machine element design stage.
|
| ３． |
Grading Policy |
|
Final grade will be calculated according to drawing assignments (100%). To pass, students must earn at least 60 points out of 100.
|
| ４． |
Textbook and Reference |
|
They will be introduced in the class.
|
| ５． |
Requirements (Assignments) |
|
Will be introduced in the class.
|
| ６． |
Note |
|
This course will be taught in Japanese.
|
| ７． |
Schedule |
|
| １. Guidance, Purpose and ability of the 3D Computer Aided Designing |
| ２. Basic operations (mouse operation, GUI interface, workbench, etc) |
| ３. Fundamentals of the operation #1 : Sketch and basic 3D modeling |
| ４. Fundamentals of the operation #2 : Fundamental features (mouse operations, choose the "Material", etc.), Basic exercise: V block |
| ５. Sketch 1 : Basic exercises |
| ６. Sketch 2 : Practical exercises |
| ７. Part design 1: Protrusion, Remove, Axial rotation, Axial slotting, Holing, etc. |
| ８. Part design 2: Chamfar, Fillet, Dlaft, Patterning, Mirrering, Schaling, etc. |
| ９. Wireflame modeling |
| 10. Surface modeling |
| 11. Assembly 1: Basic exercises |
| 12. Assembly 2: Practical exercises |
| 13. Drafting, and check assignments |
| 14. Design project #1: group discussion and designing |
| 15. Design project #2: modeling and check, presentation |
|
|