1. |
Outline |
|
The basic operations of 3D-CAD (Computer Aided Designing) with CATIA V5 and the imaging of a solid shape from the drawing are taught.
|
2. |
Objectives |
|
The basic operations of 3D-CAD required for mechanical engineers are studied. And the example of problems in 3D-modeling based on the models in the real machinery industry are solved for the improvement of efficiency at the machine element design stage.
|
3. |
Grading Policy |
|
Final grade will be calculated according to drawing assignments (100%). To pass, students must earn at least 60 points out of 100.
|
4. |
Textbook and Reference |
|
They will be introduced in the class.
|
5. |
Requirements (Assignments) |
|
Will be introduced in the class.
|
6. |
Note |
|
This course will be taught in Japanese.
|
7. |
Schedule |
|
1. Guidance, Purpose and ability of the 3D Computer Aided Designing |
2. Basic operations (mouse operation, GUI interface, workbench, etc) |
3. Fundamentals of the operation #1 : Sketch and basic 3D modeling |
4. Fundamentals of the operation #2 : Fundamental features (mouse operations, choose the "Material", etc.), Basic exercise: V block |
5. Sketch 1 : Basic exercises |
6. Sketch 2 : Practical exercises |
7. Part design 1: Protrusion, Remove, Axial rotation, Axial slotting, Holing, etc. |
8. Part design 2: Chamfar, Fillet, Dlaft, Patterning, Mirrering, Schaling, etc. |
9. Wireflame modeling |
10. Surface modeling |
11. Assembly 1: Basic exercises |
12. Assembly 2: Practical exercises |
13. Drafting, and check assignments |
14. Design project #1: group discussion and designing |
15. Design project #2: modeling and check, presentation |
|
1. |
Outline |
|
The basic operations of 3D-CAD (Computer Aided Designing) with CATIA V5 and the imaging of a solid shape from the drawing are taught.
|
2. |
Objectives |
|
The basic operations of 3D-CAD required for mechanical engineers are studied. And the example of problems in 3D-modeling based on the models in the real machinery industry are solved for the improvement of efficiency at the machine element design stage.
|
3. |
Grading Policy |
|
Final grade will be calculated according to drawing assignments (100%). To pass, students must earn at least 60 points out of 100.
|
4. |
Textbook and Reference |
|
They will be introduced in the class.
|
5. |
Requirements (Assignments) |
|
Will be introduced in the class.
|
6. |
Note |
|
This course will be taught in Japanese.
|
7. |
Schedule |
|
1. Guidance, Purpose and ability of the 3D Computer Aided Designing |
2. Basic operations (mouse operation, GUI interface, workbench, etc) |
3. Fundamentals of the operation #1 : Sketch and basic 3D modeling |
4. Fundamentals of the operation #2 : Fundamental features (mouse operations, choose the "Material", etc.), Basic exercise: V block |
5. Sketch 1 : Basic exercises |
6. Sketch 2 : Practical exercises |
7. Part design 1: Protrusion, Remove, Axial rotation, Axial slotting, Holing, etc. |
8. Part design 2: Chamfar, Fillet, Dlaft, Patterning, Mirrering, Schaling, etc. |
9. Wireflame modeling |
10. Surface modeling |
11. Assembly 1: Basic exercises |
12. Assembly 2: Practical exercises |
13. Drafting, and check assignments |
14. Design project #1: group discussion and designing |
15. Design project #2: modeling and check, presentation |
|
|