| １． |
Outline |
|
Main topics are as followings:
・Understanding the structure and functions of the hand winch
・Design planning (include the development of specifications)
・Design of the wire rope
・Design of the winch drum
・Design of the geared-transmission
・Design of the ratchet and wheel
・Design of the band brake
・Design of various shafts and winch handle
*It is desirable that the student has an experience of designing the typical machine elements such as a flange, screw, shaft, coupling and geared-transmission before attendance.
|
| ２． |
Objectives |
|
A practice of the mechanical designing with a simple hand winch. The practice includes the design planning, analysis and drawing using CAD systems.
|
| ３． |
Grading Policy |
|
Final grade will be calculated according to following, design reports (50%), drawing assignments (50%). To pass, students must earn at least 60 points out of 100.
|
| ４． |
Textbook and Reference |
|
手巻きウインチの設計（Design of hand winch, in Japanese）, Third edition
by 機械設計研究会 (kikai sekkei kyokai)
OHM sha
And other references will be introduced in the class.
|
| ５． |
Requirements (Assignments) |
|
The detail will be introduced in the class.
|
| ６． |
Note |
|
This course will be taught in Japanese.
|
| ７． |
Schedule |
|
| １. Guidance, Structure and features of the hand winch, Design process, Part design #1: Wire and Drum |
| ２. Part design #2: Gear |
３. Part design #3: Ratchet
|
| ４. Part design #4: Brake 1 |
| ５. Part design #5: Brake 2 |
| ６. Part design #6: Shaft 1 |
| ７. Part design #7: Shaft 2 |
| ８. Part design #8: Bearing |
| ９. Part design #9: Flame, Check the report |
| 10. Drawing #1: Drum, Gear, Ratchet |
| 11. Drawing #2: Break |
| 12. Drawing #3: Shaft, Bearing |
| 13. Drawing #4: Flame, Assembly, Check drawings (#1-#4) |
14. Design project #1: group discussion and designing
|
| 15. Design project #2: modeling and check, presentation |
|
| １． |
Outline |
|
Main topics are as followings:
・Understanding the structure and functions of the hand winch
・Design planning (include the development of specifications)
・Design of the wire rope
・Design of the winch drum
・Design of the geared-transmission
・Design of the ratchet and wheel
・Design of the band brake
・Design of various shafts and winch handle
*It is desirable that the student has an experience of designing the typical machine elements such as a flange, screw, shaft, coupling and geared-transmission before attendance.
|
| ２． |
Objectives |
|
A practice of the mechanical designing with a simple hand winch. The practice includes the design planning, analysis and drawing using CAD systems.
|
| ３． |
Grading Policy |
|
Final grade will be calculated according to following, design reports (50%), drawing assignments (50%). To pass, students must earn at least 60 points out of 100.
|
| ４． |
Textbook and Reference |
|
手巻きウインチの設計（Design of hand winch, in Japanese）, Third edition
by 機械設計研究会 (kikai sekkei kyokai)
OHM sha
And other references will be introduced in the class.
|
| ５． |
Requirements (Assignments) |
|
The detail will be introduced in the class.
|
| ６． |
Note |
|
This course will be taught in Japanese.
|
| ７． |
Schedule |
|
| １. Guidance, Structure and features of the hand winch, Design process, Part design #1: Wire and Drum |
| ２. Part design #2: Gear |
３. Part design #3: Ratchet
|
| ４. Part design #4: Brake 1 |
| ５. Part design #5: Brake 2 |
| ６. Part design #6: Shaft 1 |
| ７. Part design #7: Shaft 2 |
| ８. Part design #8: Bearing |
| ９. Part design #9: Flame, Check the report |
| 10. Drawing #1: Drum, Gear, Ratchet |
| 11. Drawing #2: Break |
| 12. Drawing #3: Shaft, Bearing |
| 13. Drawing #4: Flame, Assembly, Check drawings (#1-#4) |
14. Design project #1: group discussion and designing
|
| 15. Design project #2: modeling and check, presentation |
|
|