| １． |
Outline |
|
Students will learn the following contents:
(1) Structure and performance of automobiles.
(2) Dynamics of automobiles.
(3) Fuel and lubricant.
(4) Foundations of electric and electronic theory.
Although this lesson is mainly lecture type, exercises are carried out in pairs, and everyone will discuss and present their answers.
In this lesson, you will acquire knowledge, techniques and attitudes on the degree granting policies DP 2 and DP 5.
|
| ２． |
Objectives |
|
Students understand the basic structure of the car and the basic knowledge of the principles in general, and can explain the basic contents of automobile technology required by automobile engineers.
|
| ３． |
Grading Policy |
|
Students are evaluated by using the results of the 15th test (80%) and quiz (20%).
The answers will be explained after the test and quiz. An example of the answer is shown in LMS.
|
| ４． |
Textbook and Reference |
|
textbook:
"Foundation Automotive Engineering" Japan Automobile Development Promotion Federation Federation (supervised by the Ministry of Land, Infrastructure and Transportation Automobile Transportation Administration)
"Internal Combustion Engine, Fuel, Oil and Fat" National Association of Automotive Colleges and Maintenance Schools (Recommended by the Ministry of Land, Infrastructure, Transport and Tourism)
All ISBN codes not stated
Reference book:
"A book that understands all of the cars that a professional teaches" (Otsukawa Osamu supervised jujube company) ISBN 978-4-8163-4641-5
"Automobile Technology Handbook" (Public Utility Corporation Association of Automotive Engineers of Japan) ISBN 978-4-904056-59-2
|
| ５． |
Requirements (Assignments) |
|
Read the class content posted on the LMS as preparation. Please read through the applicable range in the textbook and reference book, and understand the contents. In addition, since some homework such as assignment will be shown almost every time, please finish it by next lesson. Approximately 1 hour for preparation, 2 hours for assignment and review.
|
| ６． |
Note |
|
Students are required to attend all lessons. Late arrival, leave early and absence are monitored.
Introduction to Auto Vehicle Technology is a ◆ mark of compulsory subjects of the Automobile Technology Course [AT course].
We will conduct a small test at the 7th meeting and confirm the understanding level towards the middle of the course. In addition to using LMS as an independent learning support, we will implement the Mobile-MARS test and questionnaire function as an interactive class as appropriate.
|
| ７． |
Schedule |
|
１. Outline of automobile
Preliminary study: Reading basic automotive engineering P 7 - 12 and understanding the outline of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
２. Car specifications
Preliminary training: Through basic automotive engineering P 93 - 98, understanding about various car specifications
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
３. Structure and performance of automobile (principle of construction engine of automobile gasoline engine)
Preliminary study: Reading basic automotive engineering P13 ~ 23 and understanding the structure of car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
４. Structure and performance of automobile (diesel engine power transmission device accelerator and suspension)
Preliminary study: Reading basic automotive engineering P 24 - 35 and understanding the structure of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
５. Structure and performance of automobile (steering wheel and tire wheel alignment)
Preliminary study: Reading basic automotive engineering P35-37 and understanding the structure of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
６. Structure and performance of automobile (Brake device frame and body lighting device instrument and alarm device attached device)
Preliminary examination: To read through Basic Motor Engineering P 38 - 45 and understand the structure of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
７. Electricity and magnetism (basis of electricity) and quiz
Preliminary examination: To read through Basic Motor Engineering P79-82 and understand the basic principles and rules
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
８. Electricity and magnetism (foundation of magnetism)
Preliminary course: To read through Basic Motor Engineering P88 ~ 91 and understand basic principles / laws
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
９. Electricity and magnetism (foundation of semiconductors)
Preliminary study: Read through Basic Motor Engineering P87 and understand basic principles and rules
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
10. Electric and magnetic (Measurement and calculation of current, voltage, resistance)
Preliminary examination: To read through Basic Motor Engineering P 84 - 87 and understand the basic principles and rules
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
11. Electric and magnetic (motor, generator and battery)
Preliminary study: Please read the contents uploaded to LMS and understand the structure of the motor
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
12. fuel
Preliminary study: Internal combustion engine, Fuel · grease read through P37 ~ 46 and understand the outline of fuel
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
13. Lubrication and lubricant
Preliminary study: Read the internal combustion engine, fuel · grease P 47 - 63 and understand the principle and role of lubrication and lubricant
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
14. Presentation on the subject and general discussion
Preliminary study: Learning about assignments given in advance and preparing presentation materials or reports
Review: Consideration of issues again based on contents announced on the lecture day
|
15. Test, summary
Preliminary examination: The test range will be drawn from the contents of all lecture
Review: I will upload an example answer example to LMS so please read it and solve it again
|
|
| １． |
Outline |
|
Students will learn the following contents:
(1) Structure and performance of automobiles.
(2) Dynamics of automobiles.
(3) Fuel and lubricant.
(4) Foundations of electric and electronic theory.
Although this lesson is mainly lecture type, exercises are carried out in pairs, and everyone will discuss and present their answers.
In this lesson, you will acquire knowledge, techniques and attitudes on the degree granting policies DP 2 and DP 5.
|
| ２． |
Objectives |
|
Students understand the basic structure of the car and the basic knowledge of the principles in general, and can explain the basic contents of automobile technology required by automobile engineers.
|
| ３． |
Grading Policy |
|
Students are evaluated by using the results of the 15th test (80%) and quiz (20%).
The answers will be explained after the test and quiz. An example of the answer is shown in LMS.
|
| ４． |
Textbook and Reference |
|
textbook:
"Foundation Automotive Engineering" Japan Automobile Development Promotion Federation Federation (supervised by the Ministry of Land, Infrastructure and Transportation Automobile Transportation Administration)
"Internal Combustion Engine, Fuel, Oil and Fat" National Association of Automotive Colleges and Maintenance Schools (Recommended by the Ministry of Land, Infrastructure, Transport and Tourism)
All ISBN codes not stated
Reference book:
"A book that understands all of the cars that a professional teaches" (Otsukawa Osamu supervised jujube company) ISBN 978-4-8163-4641-5
"Automobile Technology Handbook" (Public Utility Corporation Association of Automotive Engineers of Japan) ISBN 978-4-904056-59-2
|
| ５． |
Requirements (Assignments) |
|
Read the class content posted on the LMS as preparation. Please read through the applicable range in the textbook and reference book, and understand the contents. In addition, since some homework such as assignment will be shown almost every time, please finish it by next lesson. Approximately 1 hour for preparation, 2 hours for assignment and review.
|
| ６． |
Note |
|
Students are required to attend all lessons. Late arrival, leave early and absence are monitored.
Introduction to Auto Vehicle Technology is a ◆ mark of compulsory subjects of the Automobile Technology Course [AT course].
We will conduct a small test at the 7th meeting and confirm the understanding level towards the middle of the course. In addition to using LMS as an independent learning support, we will implement the Mobile-MARS test and questionnaire function as an interactive class as appropriate.
|
| ７． |
Schedule |
|
１. Outline of automobile
Preliminary study: Reading basic automotive engineering P 7 - 12 and understanding the outline of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
２. Car specifications
Preliminary training: Through basic automotive engineering P 93 - 98, understanding about various car specifications
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
３. Structure and performance of automobile (principle of construction engine of automobile gasoline engine)
Preliminary study: Reading basic automotive engineering P13 ~ 23 and understanding the structure of car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
４. Structure and performance of automobile (diesel engine power transmission device accelerator and suspension)
Preliminary study: Reading basic automotive engineering P 24 - 35 and understanding the structure of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
５. Structure and performance of automobile (steering wheel and tire wheel alignment)
Preliminary study: Reading basic automotive engineering P35-37 and understanding the structure of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
６. Structure and performance of automobile (Brake device frame and body lighting device instrument and alarm device attached device)
Preliminary examination: To read through Basic Motor Engineering P 38 - 45 and understand the structure of the car
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
７. Electricity and magnetism (basis of electricity) and quiz
Preliminary examination: To read through Basic Motor Engineering P79-82 and understand the basic principles and rules
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
８. Electricity and magnetism (foundation of magnetism)
Preliminary course: To read through Basic Motor Engineering P88 ~ 91 and understand basic principles / laws
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
９. Electricity and magnetism (foundation of semiconductors)
Preliminary study: Read through Basic Motor Engineering P87 and understand basic principles and rules
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
10. Electric and magnetic (Measurement and calculation of current, voltage, resistance)
Preliminary examination: To read through Basic Motor Engineering P 84 - 87 and understand the basic principles and rules
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
11. Electric and magnetic (motor, generator and battery)
Preliminary study: Please read the contents uploaded to LMS and understand the structure of the motor
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
12. fuel
Preliminary study: Internal combustion engine, Fuel · grease read through P37 ~ 46 and understand the outline of fuel
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
13. Lubrication and lubricant
Preliminary study: Read the internal combustion engine, fuel · grease P 47 - 63 and understand the principle and role of lubrication and lubricant
Review: to understand the content of the lecture range again based on the LMS teaching materials, or to solve if the assignment is given as homework
|
14. Presentation on the subject and general discussion
Preliminary study: Learning about assignments given in advance and preparing presentation materials or reports
Review: Consideration of issues again based on contents announced on the lecture day
|
15. Test, summary
Preliminary examination: The test range will be drawn from the contents of all lecture
Review: I will upload an example answer example to LMS so please read it and solve it again
|
|
|